This is a tool that lets you convert images into codes that you can put into Arc Signs in the game Creativerse, free to play on Steam
Select the image you want to convert to CreatiSign code (or drag it onto the file selector), then alter the settings as you please and click the green "Execute" button at the bottom-left corner of this page.
The image will NOT be sent to any server. You can save this page on your desktop and use it offline too, if you're concerned about that :)
Only tested in Chrome, may work in other browsers.
Creatisign Generator discussion on Steam Community Forums
| Input image: | select or drag the image here above |
|---|---|
| <zoffset> tag: | measured in blocks, defaults to zero in the game when omitted and results in the graphic placed in the middle of a block space; set it to zero to omit it from the code; defaults to 0.51 here to bring it slightly in front of a wall if you place the Arc Sign under that wall |
| <offset> tag: | measured in blocks, defaults to about 0.55 in the game when omitted; set it to zero to omit it from the code |
| <width> tag: | range 0 ~ 8, amount of horizontal blocks the sign is allowed to grow before wrapping; set it to zero to omit it from the code |
| <size> tag: | using the "Arial SDF" font a period of size 1 is about 1/100th of a block |
| Main spacing tweak (%): | values higher than -10 start to show the spacing grid between pixels, the higher the value, the larger the horizontal spacing |
| Vertical spacing tweak (% of main spacing tweak): | 100 gives equal spacing in both directions, 200 doubles the vertical spacing, 50 halves it and so forth |
| Max decimals after tweaking: | rounding for the the various numeric tags |
| RGB Gamma correction | range 0.01 ~ 7.99, preset to 0.5 to work around the current deviation of RGB shades, set this to 1 to disable gamma correction altogether |
| Alpha correction | range 0.01 ~ 7.99, preset to 1 (disabled) to let you use it only if necessary |
| helps reducing the code size, but can alter the colors of your image; short color codes will be used anyways if they match the long codes | |
| necessary for large images but may blur pixel art; if you leave this off and try to convert large images your browser will likely hang or crash, you've been warned! | |
| really need a hint on this? | |
| Number of slices | number of horizontal slices / arc signs for splitting the image and get better resolutions; this will force an <offset> tag of 0.55 (if you set that tag to zero) |
| Character to repeat | character(s) to use to draw pixels, defaults to the period |
| Font | |
| Character count limit | 10K chars is the current Arc Sign textbox limit, this number will only be used by the auto computation of the largest resolution, you can lower it slightly (say, to 9900 or so) to ensure yourself some free space for tweaking the results in the game without risking to trim pixels off the bottom of your images |
The results will vary in color and sizes / ratio depending on the image you feed to the generator, the following numbers have been found by trial and error using the "Arial SDF" font; since you can use more than one character to be repeated, in certain patterns you can simply add spaces to increase the horizontal spacing.
Changelog